Search Results for keywords:"aviation regulation"

The Federal Aviation Administration (FAA) is proposing a new airworthiness directive for specific Airbus Canada airplanes due to software issues in their flight control systems. The directive requires a software update to ensure safe flight and landing by correcting problems with the primary flight control computer and remote electronics unit. The FAA invites public comments on this proposal, which must be submitted by April 12, 2021, and will consider any feedback before finalizing the rule. This proposal is based on a related Canadian directive addressing these safety concerns.

The Federal Aviation Administration (FAA) has established a new rule for ATR—GIE Avions de Transport Régional Model ATR42 and ATR72 airplanes. This rule requires replacing faulty Angle of Attack (AoA) probes that may not activate the stick pusher, a safety mechanism, in a timely manner, especially at low airspeeds and when flaps are extended. This condition could potentially lead to a loss of airplane control. The rule, effective April 4, 2025, aligns with a directive from the European Union Aviation Safety Agency (EASA) and prohibits installing the affected parts in these aircraft.

The Federal Aviation Administration (FAA) has issued a new airworthiness directive (AD) for certain models of Airbus Helicopters. This directive aims to improve safety by requiring the replacement of existing magnetic plugs in the main gear box with improved non-electrical magnetic plugs. These changes were prompted by the need to better collect metal particles, which could otherwise lead to the seizure of the main gear box and cause a loss of helicopter control. The directive, which becomes effective on April 1, 2021, references an AD from the European Union Aviation Safety Agency and provides guidelines for compliance.

The Federal Aviation Administration (FAA) is updating a previous safety directive for certain Airbus Helicopters, specifically Model SA330J, to address issues with the tail rotor blades. This update requires more frequent inspections and clarifies the compliance procedures. The purpose of these changes is to reduce the risk of fatigue cracks which could lead to a failure of the tail rotor blade and, consequently, loss of control of the helicopter. Helicopters must regularly undergo inspections and any rotor blades showing issues must be repaired or replaced before they can be used again.

The FAA has issued a new airworthiness directive (AD) for certain Bell Textron Canada Limited Model 505 helicopters to address a safety risk involving deformation in the door hinge of the ballast box assembly, which could lead to dangerous scenarios during flight. This directive requires the removal of all ballast weights from the affected parts and prohibits their use to prevent possible damage to the tail rotor which might result in loss of control over the aircraft. Public comments on this directive are invited until May 27, 2025, while compliance with the directive is required by April 25, 2025. This AD incorporates instructions from a Transport Canada emergency directive and aims to ensure safe flight operations.

The Federal Aviation Administration (FAA) has issued a final rule modifying the Class D and Class E airspace at Jack Northrop Field/Hawthorne Municipal Airport in California. The changes are intended to better accommodate and manage flights under instrument and visual flight rules at the airport. This modification also updates the airport’s legal description to reflect the FAA’s database. The airspace changes are set to take effect on June 12, 2025.

The Federal Aviation Administration (FAA) has issued a new airworthiness directive (AD) for certain Bombardier airplanes due to reports of missing or damaged inboard flap seal plate assemblies. This AD mandates repetitive inspections for cracks and the replacement of these parts to address a potential safety risk. It becomes effective January 6, 2025, and affects 43 aircraft registered in the United States. The directive aims to prevent the inboard flap seal plates from detaching during certain flight conditions, which could result in excessive vibration and damage to the airplane.

The Federal Aviation Administration (FAA) has issued a new airworthiness directive (AD) affecting all Saab AB, Model SAAB 2000 airplanes. This directive was inspired by a safety report regarding reversed connections in the wheel speed transducers within the main landing gear, which could reduce braking capability and pose a risk during landing. The AD requires a mandatory inspection and possible correction of the anti-skid system harnesses, following procedures detailed by the European Union Aviation Safety Agency (EASA). This rule aims to ensure the safety of these aircraft by preventing potential damage and maintaining control during critical phases like landing.

The Federal Aviation Administration (FAA) has issued a correction to a previous rule concerning several air navigation routes and airways. The original rule, published on October 24, 2024, contained incorrect coordinates for a route point in the regulatory text for routes Q-902 and T-487. This correction fixes that error by providing the accurate coordinates. The correction takes effect on December 26, 2024.

The Federal Aviation Administration (FAA) has announced a petition from ATL Europe seeking an exemption from specific Federal Aviation Regulations related to a Crew Rest Module (CRM) in cargo aircraft. This notice, aimed at boosting public involvement in the FAA's exemption process, details ATL Europe's request to carry up to two authorized persons in a CRM located in a cargo area of the plane and to bypass the requirement for manual deployment of oxygen units in this setup. Public comments on this petition are due by April 8, 2025, and can be submitted through various methods including mail, online, or in-person delivery.