Search Results for keywords:"Japan Electrical Safety

Consol Pennsylvania Coal Company, LLC submitted a petition to the Mine Safety and Health Administration (MSHA) seeking permission to use certain battery-powered vibration analyzers and data collectors at the Enlow Fork Mine in Pennsylvania. These devices, the SCOUT100EX, SCOUT140EX, and vb7 models, are intended to replace a discontinued model and help prevent equipment failures in hazardous areas within the mine. Consol argues that these devices provide an equivalent level of safety as required by current standards, even though they are not MSHA-approved. The alternative method proposed by Consol is to ensure miners' safety while using these devices under specific conditions, including regular inspections and training.

The Pipeline and Hazardous Materials Safety Administration (PHMSA) has published a notice to request public comments on a special permit application from Tennessee Gas Pipeline, L.L.C. (TGP). This permit seeks an exemption from certain federal pipeline safety regulations, particularly concerning changes in pipeline class locations and maximum allowable operating pressure. The exemption covers sections of the pipeline in Texas, Louisiana, and Tennessee, which need relief instead of replacing the pipeline or reducing its pressure. Interested parties have until February 18, 2021, to submit their comments regarding the safety and environmental implications of granting this permit.

The Coast Guard has created a temporary safety zone to ensure the safety of life during cable laying operations off the coast of Virginia Beach, Virginia. This safety zone, effective from March 2, 2025, to March 1, 2026, will surround a cable laying barge and cover waters up to 1000 yards from the barge, moving as the barge progresses along a corridor out to sea. Mariners and vessels are prohibited from entering this area unless they have permission from the Captain of the Port or a designated representative, who will help communicate safe transit options. This rule ensures that navigational hazards posed by the barge's anchorage configurations are mitigated.

The Coast Guard is removing the safety and security zone for the Pilgrim Nuclear Power Plant in Plymouth, Massachusetts, since the facility has stopped power operations permanently. This change, effective January 16, 2025, is due to the rules no longer being needed because the plant is no longer operational. The removal will affect navigation charts and publications, and related navigation markers will also be taken down. This decision was supported by all commenters and will not significantly impact small enterprises or require new information collections.

The Mine Safety and Health Administration (MSHA) received a petition from Consol Pennsylvania Coal Company to allow the use of specific battery-powered vibration analyzers and data collectors that are not currently approved under MSHA standards. The company argues that no approved devices are available for purchase since older models have been discontinued. They propose using SCOUT100EX, SCOUT140EX, and vb7 devices to maintain safety in their operations, asserting that their proposed methods provide equal if not greater safety for miners. The petition outlines specific conditions and procedures for using these devices to ensure mine safety, emphasizing the need for monitoring, training, and compliance with methane detection protocols.

CSX Transportation, Inc. has requested approval from the Federal Railroad Administration (FRA) for its Product Safety Plan (PSP) related to the Trip Optimizer Air Brake Control, an energy management system installed on locomotives. This system helps to improve fuel efficiency and reduce emissions by allowing more miles of automatic operation, though a qualified train crew remains in charge. The FRA is accepting public comments on this proposal until March 17, 2025. Interested parties can submit their feedback through the regulations.gov website, using the docket number FRA-2024-0126.

The Mine Safety and Health Administration (MSHA) has received a petition from Peabody Midwest Mining, LLC requesting a change to existing safety rules. The petition seeks permission to use battery-powered radios in mining operations, arguing these radios provide the same level of safety as the current standards. Peabody explains that the previously approved radios are no longer available, hence the need to use alternative radios that are safe and practical for the work environment. Comments on this petition are being accepted until January 6, 2025.

ICG Beckley, LLC has asked the Mine Safety and Health Administration (MSHA) to allow the use of certain air purifying respirators to protect miners at its Beckley Pocahontas Mine in West Virginia. These respirators, specifically the CleanSpace EX and 3M Versaflo TR-800, are not currently approved under MSHA standards, but the company argues they offer comparable protection and comfort, especially in hot working conditions. The petition highlights issues with the supply and discontinuation of previously used equipment and outlines rigorous inspection and training procedures to ensure safety. MSHA is accepting public comments on the petition until April 21, 2025.

PHMSA is asking the public to comment on a second set of draft Frequently Asked Questions (Batch-2 FAQs) related to the "Safety of Gas Transmission Pipelines" rule. This rule involves reconfirming Maximum Allowable Operating Pressure (MAOP) and expanding assessment requirements for gas transmission pipelines. The FAQs are designed to help explain the rule and how to implement necessary changes, but they are not legally binding. Interested individuals can submit their comments via the Federal Register or by mail, and once reviewed, the final version of the FAQs will be available online.

A petition for modification has been submitted to the Mine Safety and Health Administration (MSHA) by Rockwell Mining, LLC, seeking to change the existing safety standards. They request permission to use non-approved Powered Air Purifying Respirators (PAPRs), specifically the CleanSpace EX and 3M Versaflo TR-800 models, near certain mining areas. The petition outlines the safety and training measures that would accompany the use of these devices to ensure they maintain or improve safety standards for miners. The petition emphasizes alternatives for miners with facial hair and those who find regular respirators uncomfortable, ensuring safety is not compromised.