Search Results for agency_names:"Federal Aviation Administration"

The Federal Aviation Administration (FAA) has issued a new airworthiness directive for certain Leonardo helicopter models, specifically AB139 and AW139. This directive mandates the removal of specific engine mounting rods that do not conform to standards and prohibits their installation on any helicopter, as these rods could potentially fail and cause loss of control of the aircraft. The directive is effective from April 1, 2021, and operators are expected to ensure compliance by replacing the non-conforming rods with approved ones. This action was initiated due to a report of non-conforming parts and aims to enhance the safety of these helicopters.

The Federal Aviation Administration (FAA) is proposing a new rule that updates the requirements for checking certain Embraer airplane parts for safety issues, replacing a previous rule from 2020. This proposed rule would require more frequent inspections of specific engine parts to prevent them from cracking, which could potentially lead to engine separation and safety hazards during flight. The FAA invites public comments on this proposal until March 24, 2025, and aims to ensure the continued safety of affected American-operated airplanes by adopting international safety standards identified by Brazil's aviation authority, Agência Nacional de Aviação Civil (ANAC).

The Federal Aviation Administration (FAA) has proposed a new rule for Airbus Helicopters due to a safety concern. This new rule addresses a problem with the sliding doors on certain models, where a door locked in the open position could detach during flight. To fix this, the proposed rule requires modifications to the door components and prohibits installing the faulty parts. Public comments on this proposed rule are being accepted until March 3, 2025.

The FAA has issued a new airworthiness directive for specific models of Airbus Helicopters Deutschland GmbH, including EC135 and its variants. This directive requires operators to remove certain Titanium (Ti) bolts, identified by specific part numbers and markings, from service and ban their installation on the forward tail rotor drive shaft. These actions were prompted by safety concerns following a report of a broken Ti-bolt, which could lead to reduced control of the helicopter. The rule is effective as of March 29, 2021, and aims to prevent possible helicopter control issues linked to these Ti-bolts.

The Federal Aviation Administration (FAA) issued a new rule to replace an older directive for Boeing 787 airplanes to fix a potential safety issue. This new rule requires changes to maintenance programs and specific parts on the planes to ensure the engine fire handle works correctly and prevent potential fire hazards. The rule mandates these changes be made by a certain date and prohibits the installation of certain older parts. The FAA took public comments into account before finalizing the rule, which aims to enhance aviation safety without imposing significant economic impacts.

The Federal Aviation Administration (FAA) is proposing a new rule that affects various models of Airbus A300-600 series airplanes. This proposed rule wants to add new, stricter maintenance and inspection requirements due to concerns about the safety risks from aging aircraft systems. These changes are based on recommendations by the European Union Aviation Safety Agency (EASA) and will replace some previous maintenance instructions. The public can comment on this proposal until May 9, 2025.

The Federal Aviation Administration (FAA) is proposing a new airworthiness directive for certain models of Siam Hiller Holdings, Inc. helicopters. This proposal is due to reports of cracks in the main rotor transmission drive shaft that could result in dangerous conditions. The directive requires inspecting specific drive shafts for cracks, prohibits installing uninspected drive shafts, and restricts the use of certain paint removers. The FAA has invited public comments on this proposal, highlighting the importance of addressing these safety concerns.

The Federal Aviation Administration (FAA) has extended the rule that prohibits certain U.S. flights over Libya due to ongoing safety risks. This final rule will remain effective until March 20, 2028, as the FAA cites ongoing political and security instability. The prohibition covers U.S. air carriers, commercial operators, and others, except under specific circumstances involving foreign carriers. The FAA finds the extension necessary to protect U.S. civil aviation due to challenges like airspace deconfliction and the presence of advanced weaponry controlled by various factions within Libya.

The Federal Aviation Administration (FAA) has issued a final rule concerning Airbus Helicopters Model AS350B3. This rule mandates upgrades to the electrical system for the throttle twist grip and inspections of a microswitch electrical harness to prevent potential engine issues where helicopters could remain in idle mode unintentionally. The rule, prompted by similar European regulations, aims to ensure safety and requires compliance by a specific date or service hours, with details available from Airbus Helicopters. The rule affects 517 helicopters and is meant to avoid jeopardizing flight safety and prevent accidents.

The Federal Aviation Administration (FAA) issued a final rule to update airworthiness directives for certain Airbus SAS Model A318, A319, A320, and A321 airplanes. This rule replaces previous directives by incorporating more restrictive limitations to address issues like fatigue cracking and corrosion that might compromise aircraft integrity. The updates aim to ensure continued safety and are aligned with recent European Union Aviation Safety Agency (EASA) requirements. These changes are effective from March 21, 2025, and impact nearly 1,900 airplanes in the U.S.