Search Results for agency_names:"Transportation Department"

The Federal Aviation Administration (FAA) has issued a new rule for certain Airbus Helicopters Deutschland GmbH models to address issues with malfunctioning emergency fuel shut-off switches. This rule requires inspections of these switches and, if necessary, repairs or replacements to prevent potential in-flight engine shutdowns. The urgency of this safety measure means it's effective from March 24, 2025, with some compliance actions required within a limited timeframe. The FAA invites public comments on this rule until April 21, 2025, and further details can be found through official resources like regulations.gov.

The Federal Aviation Administration (FAA) has issued a new rule that updates airworthiness directives for Airbus SAS Model A318, A319, A320, and A321 airplanes. This rule, taking effect on January 13, 2025, requires aircraft operators to update their maintenance or inspection programs with more restrictive safety measures as specified by the European Union Aviation Safety Agency (EASA). The updated requirements address the risks associated with aging aircraft systems to prevent possible failures of vital parts and ensure the structural integrity of the airplanes. The FAA estimates that these changes will cost about $7,650 per operator for implementation, based on 90 work-hours required per operator.

The Federal Aviation Administration (FAA) is proposing a new airworthiness directive for certain models of Siam Hiller Holdings, Inc. helicopters. This proposal is due to reports of cracks in the main rotor transmission drive shaft that could result in dangerous conditions. The directive requires inspecting specific drive shafts for cracks, prohibits installing uninspected drive shafts, and restricts the use of certain paint removers. The FAA has invited public comments on this proposal, highlighting the importance of addressing these safety concerns.

The Federal Aviation Administration (FAA) is proposing a new airworthiness directive for all Leonardo S.p.a. Model A119 and AW119 MKII helicopters. This proposal is due to a reported electrical failure in the starter-generator caused by a broken drive shaft, which led to partial battery power loss. The directive would require helicopters to have a battery discharge detector installed and to update the Rotorcraft Flight Manual. This action aims to prevent the risk of losing complete electrical power, which could result in losing control of the helicopter.

The FAA has issued a new rule replacing previous airworthiness directives for ATR72 airplanes. This rule mandates incorporating updated airworthiness limitations to prevent fatigue cracking that could compromise the airplane's structure. The updated limitations are based on European Union Aviation Safety Agency guidelines and apply to certain ATR72 models, excluding those with certificates issued after December 12, 2019. The new requirements must be implemented by March 31, 2021, with specified compliance details and options for alternative approaches.

FMCSA, part of the Department of Transportation, has extended the compliance deadline for certain parts of the "Broker and Freight Forwarder Financial Responsibility" rule from January 16, 2025, to January 16, 2026. This extension gives brokers, freight forwarders, and others additional time to prepare for and use a new online registration system that isn't expected to be ready until 2025. Despite opposition from some groups who argue the delay is excessive, FMCSA claims the extension will aid in a smoother transition and provide time for training. The final rule aims to enhance the tracking of financial responsibilities and streamline administrative processes related to broker and freight forwarder operations.

The National Highway Traffic Safety Administration (NHTSA), part of the Department of Transportation, announced a new study to examine how Lane Departure Warning (LDW) and Lane Keep Assist (LKA) systems help drivers respond better. They plan to collect information from up to 80 drivers and want feedback from the public by May 9, 2025. The aim is to improve safety features in cars, reducing crashes by preventing lane departures. NHTSA will later release a report with their findings.

The Federal Aviation Administration (FAA) has issued a final rule concerning Airbus Helicopters Model AS350B3. This rule mandates upgrades to the electrical system for the throttle twist grip and inspections of a microswitch electrical harness to prevent potential engine issues where helicopters could remain in idle mode unintentionally. The rule, prompted by similar European regulations, aims to ensure safety and requires compliance by a specific date or service hours, with details available from Airbus Helicopters. The rule affects 517 helicopters and is meant to avoid jeopardizing flight safety and prevent accidents.

The Federal Aviation Administration (FAA) has issued a new airworthiness directive (AD) for all Airbus Helicopters Model EC225LP helicopters due to a reported crack in the main rotor hub (MRH) sleeve. This directive requires regular inspections of certain MRH sleeves and restricts the installation of these sleeves unless they meet inspection requirements based on a European Union Aviation Safety Agency (EASA) directive. The FAA aims to address this unsafe condition, as failing to manage it could lead to major structural failures and loss of control of the helicopter. The FAA is accepting comments on this final rule until January 21, 2025, and the rule becomes effective on December 20, 2024.

The Federal Highway Administration (FHWA) has issued a final rule that amends its existing Buy America requirements. This rule terminates the general waiver for manufactured products and applies new requirements to products used in Federal-aid highway projects, aligning with the Build America, Buy America Act (BABA). These requirements mandate that manufactured products must be assembled in the U.S., and beginning October 2026, at least 55% of their components by cost must also be of U.S. origin. The rule aims to bolster domestic manufacturing and create a more resilient supply chain.