Search Results for keywords:"Transport Canada"

The FAA has issued a final rule requiring inspections for certain Airbus Canada Model BD-500-1A10 and BD-500-1A11 airplanes due to insufficient clearance between fire extinguishing system lines and fasteners, which could lead to a failure in the fire extinguishing system. This rule, effective May 2, 2025, mandates inspections and corrective actions to prevent a possible unsafe condition caused by the fouling of fire extinguishing lines, as outlined in an airworthiness directive from Transport Canada. The FAA addressed comments received during rulemaking and clarified part number corrections and compliance timelines.

The Federal Aviation Administration (FAA) has issued a new airworthiness directive (AD) for certain Airbus Canada Model BD-500 airplanes, effective January 13, 2025. This directive was prompted by problems with the locking mechanism on pilot and co-pilot seats, which could increase crew workload during flight. The AD requires modifications to these seats to prevent such issues, in alignment with Transport Canada's regulations. Comments from aviation companies like Collins Aerospace and Delta Airlines were considered, but the FAA decided not to make changes based on those suggestions.

The Federal Aviation Administration (FAA) has issued a new airworthiness directive (AD) for Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes. This action comes after a design review found that the software meant to protect against large leaks in the engine bleed duct was not fully functional, which could lead to dual engine failure. The directive requires airlines to update their airplane flight manuals with new procedures for manual isolation of certain engine functions in the event of a bleed duct leak. The purpose of this rule is to improve safety and prevent potential accidents.

The Federal Aviation Administration (FAA) has enacted a new airworthiness directive (AD) for all Airbus Canada Model BD-500-1A10 and BD-500-1A11 airplanes. This directive was issued in response to revised operational loads identified in aircraft design reviews that could impact structural integrity. The AD requires using updated repair manuals and reassessing previous repairs to ensure aircraft safety. Effective April 15, 2025, this action is based on a related directive by Transport Canada and aims to prevent potential structural issues during flight.

The Federal Aviation Administration (FAA) has proposed a new airworthiness directive for certain Airbus Canada airplanes, due to concerns about electrical bonding resistance caused by a change in the material of a connector component. This new rule would require testing and possibly installing additional components to ensure the planes are not at risk from electromagnetic interference or lightning. The FAA aims to address this safety issue as identified by Transport Canada. Comments on this proposal are welcome until April 7, 2025.

The Federal Aviation Administration (FAA) is proposing a new rule that updates the existing safety guidelines for certain Airbus Canada Limited Partnership airplanes. This proposal aims to replace a previous directive by requiring the installation of new software for the primary flight control computer, which addresses safety issues like misleading error messages and the unplanned engagement of systems like the autopilot. The FAA encourages public comments on this proposal by May 2, 2025, before finalizing the rule. This initiative is part of ongoing efforts to ensure the safe operation of these aircraft.

The Federal Aviation Administration (FAA) has issued a final rule regarding the airworthiness of certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes. This rule addresses a safety issue where lightning diverter strips on nose radomes were painted during production, which can weaken lightning protection. The directive requires inspections for paint and mandates the replacement of these diverter strips if necessary to prevent potential lightning damage to aircraft equipment. The rule is effective April 9, 2025, and compliance is mandatory for operators of affected aircraft models in the U.S.

The Federal Aviation Administration (FAA) is proposing a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A11 airplanes. This action was spurred by an incident involving hydraulic fluid leakage caused by possibly using an uncalibrated torque wrench. The proposed rule requires proper torquing and sealing of the hydraulic fittings as detailed in a Transport Canada AD. This is intended to prevent potential hydraulic system failures and ensure the continued safety of these aircraft models.