Search Results for keywords:"Airworthiness Directive"

The Federal Aviation Administration (FAA) is proposing a new airworthiness directive for certain models of Siam Hiller Holdings, Inc. helicopters. This proposal is due to reports of cracks in the main rotor transmission drive shaft that could result in dangerous conditions. The directive requires inspecting specific drive shafts for cracks, prohibits installing uninspected drive shafts, and restricts the use of certain paint removers. The FAA has invited public comments on this proposal, highlighting the importance of addressing these safety concerns.

The Federal Aviation Administration (FAA) has issued a new airworthiness directive (AD) for various Airbus SAS aircraft models, including the A319, A320, and A321 series. This directive addresses a safety concern involving the nose landing gear (NLG) repairs in aircraft approved for operation in the Commonwealth of Independent States (CIS). Due to different runway standards in the CIS, certain parts may require repair or replacement to prevent damage, failure, and potential safety risks. Effective March 7, 2025, this rule requires compliance with repair and replacement guidelines specified by the European Union Aviation Safety Agency (EASA).

The Federal Aviation Administration (FAA) is proposing a new rule to replace the existing Airworthiness Directive for certain Airbus SAS airplanes, following reports of cracks during inspections. This new rule will require continuous inspections, specific corrective actions, and modify the forward pressure bulkhead to prevent cracking, which could threaten the aircraft's structural integrity. The FAA is seeking public comments on this proposal by May 12, 2025. The rule aims to ensure safety and prevent possible structural failures in these airplane models.

The Federal Aviation Administration (FAA) has proposed a new airworthiness directive (AD) for specific Bombardier airplane models, prompted by the need for stricter safety measures. This directive requires updates to maintenance and inspection programs to include new and more restrictive airworthiness limitations. The aim is to address issues that could potentially affect the stability and control of the aircraft during landing, which might lead to damage. The proposal invites public comments until March 21, 2025, and estimates that the directive will impact 484 U.S.-registered aircraft, with a cost of $7,650 per operator for compliance.

The Federal Aviation Administration (FAA) has issued a new airworthiness directive (AD) for all Airbus Helicopters Model EC225LP helicopters due to a reported crack in the main rotor hub (MRH) sleeve. This directive requires regular inspections of certain MRH sleeves and restricts the installation of these sleeves unless they meet inspection requirements based on a European Union Aviation Safety Agency (EASA) directive. The FAA aims to address this unsafe condition, as failing to manage it could lead to major structural failures and loss of control of the helicopter. The FAA is accepting comments on this final rule until January 21, 2025, and the rule becomes effective on December 20, 2024.

The Federal Aviation Administration (FAA) is updating a previous safety directive for certain Airbus Helicopters, specifically Model SA330J, to address issues with the tail rotor blades. This update requires more frequent inspections and clarifies the compliance procedures. The purpose of these changes is to reduce the risk of fatigue cracks which could lead to a failure of the tail rotor blade and, consequently, loss of control of the helicopter. Helicopters must regularly undergo inspections and any rotor blades showing issues must be repaired or replaced before they can be used again.

The Federal Aviation Administration (FAA) has issued a new rule for certain Airbus Helicopters Deutschland GmbH models to address issues with malfunctioning emergency fuel shut-off switches. This rule requires inspections of these switches and, if necessary, repairs or replacements to prevent potential in-flight engine shutdowns. The urgency of this safety measure means it's effective from March 24, 2025, with some compliance actions required within a limited timeframe. The FAA invites public comments on this rule until April 21, 2025, and further details can be found through official resources like regulations.gov.

The FAA released a new airworthiness directive (AD) targeting specific models of Bombardier airplanes, namely the BD-700-1A10 and BD-700-1A11. This rule demands updates to the current maintenance and inspection programs to introduce stricter limits for brake accumulators, as these components may exceed their lifespan and fail, potentially causing loss of brake function. Affected airplanes must comply with these new standards by early 2025, and operators have 90 days from the directive's effective date to update their procedures accordingly. The rule is necessary to prevent unsafe conditions that might lead to accidents or runway excursions.

The Federal Aviation Administration (FAA) has issued a new final rule that updates and replaces an earlier airworthiness directive from 2017 concerning certain Saab AB Model 340A and 340B airplanes. This new directive introduces more stringent safety requirements following recommendations from the European Union Aviation Safety Agency (EASA). It mandates revising the planes' maintenance or inspection programs to include new airworthiness limitations, especially involving the main landing gear. These updates aim to maintain the structural integrity of the aircraft and ensure ongoing aviation safety.

The Federal Aviation Administration (FAA) is proposing to update an existing Airworthiness Directive for Robinson Helicopter Company's R44 and R44 II models. This proposed rule aims to clarify inspections of certain parts due to potential fatigue cracking that could lead to loss of control. The FAA seeks public comments by March 17, 2025, and estimates the inspection and potential replacement efforts will impact 1,725 helicopters. The rule ensures the safety of these helicopters by improving maintenance procedures.